Produktet

Po shfaqen 65–74 nga 74 përfundime gjithsej

  • TENSILE RESTRAINED FLANGE ADAPTOR FOR PE AND PVC PIPE

    TENSILE RESTRAINED FLANGE ADAPTOR FOR PE AND PVC PIPE

    Features: Body and end rings are produced from ductile iron material EN-GJS-500 (GGG 50) according to EN 1563:2011 standard Flange Adaptоrs are produced according to EN 14525:2004 Protection with epoxy coating or thermoplastic coating with black color confirmed with health inspection certificate PN10, PN16 working pressure. Equipped with steel zinc plated bolts,nuts and washers EPDM…

    Përzgjidhni mundësiLoading Done Ky produkt ka disa variante. Mundësitë mund të zgjidhen te faqja e produktit
  • TWO-PART TAPPING SADDLE FOR PE/PVC PIPES

    TWO-PART TAPPING SADDLE FOR PE/PVC PIPES

    Features The installation on PE and PVC pipes For horizontal or vertical installation Operating pressure PN16 bar, hydraulically tested according to EN12266-1: 2012 Body made of ductile iron EN-GJS-500-7 according to EN 1563:2011 Surface protection with epoxy paint min 250μm or thermoplastic confirmed with a health inspection sertificate issued by an accredited laboratory EPDM rubber…

    Përzgjidhni mundësiLoading Done Ky produkt ka disa variante. Mundësitë mund të zgjidhen te faqja e produktit
  • UNDERGROUND HYDRANT

    UNDERGROUND HYDRANT

    Features

    • Vertical installation of water or fire installation.
    • Automatic discharge after use.
    • Epoxy coating min 250 μm.
    • Working pressure PN16.
    • Connecting flange according to EN 1092-2.
    • Connecting with claw according to DIN 3221-C.
    • Maximum temperature: 50°C
    Përzgjidhni mundësiLoading Done Ky produkt ka disa variante. Mundësitë mund të zgjidhen te faqja e produktit
  • UNIVERSAL TAPPING BRIDGE

    UNIVERSAL TAPPING BRIDGE

    Features The installation on cast-iron, ductile, steel and asbestos cement pipes For horizontal or vertical installation Operating pressure PN16 bar, hydraulically tested according to EN12266-1: 2012 Body made of ductile iron EN-GJS-500-7 according to EN 1563:2011 Surface protection with epoxy paint min 250μm or thermoplastic confirmed with a health inspection sertificate issued by an accredited…

    Përzgjidhni mundësiLoading Done Ky produkt ka disa variante. Mundësitë mund të zgjidhen te faqja e produktit
  • X – BLANK FLANGE

    X – BLANK FLANGE

    Përzgjidhni mundësiLoading Done Ky produkt ka disa variante. Mundësitë mund të zgjidhen te faqja e produktit
  • XR – TAPERS FLANGES

    XR – TAPERS FLANGES

    Features: Pressure-reducing flange allows a substantial reduction of the nominal diameter and is very practical because of the short overall length Flange dimensions according to EN 1092-1:2007+A1:2013/AC:2014 Material: Steel S235JR Zinc-plated bolts according to DIN975 Working pressure: PN10 and PN16. Surface protection with epoxy paint min 250μm or thermoplastic confirmed with a health inspection certificate…

    Përzgjidhni mundësiLoading Done Ky produkt ka disa variante. Mundësitë mund të zgjidhen te faqja e produktit
  • Y PIECE

    Y PIECE

    Përzgjidhni mundësiLoading Done Ky produkt ka disa variante. Mundësitë mund të zgjidhen te faqja e produktit
  • Y STRAINER

    Y STRAINER

    Features Y- Pattern. Stainless Steel Screen. Working Pressure: PN10, PN16. Available range: DN 50-300. Inside and outside epoxy coated min. 250μm.

    Përzgjidhni mundësiLoading Done Ky produkt ka disa variante. Mundësitë mund të zgjidhen te faqja e produktit
  • Т – ALL FLANGED TEE

    Т – ALL FLANGED TEE

    Përzgjidhni mundësiLoading Done Ky produkt ka disa variante. Mundësitë mund të zgjidhen te faqja e produktit
  • ТТ – ALL FLANGED CROSS

    ТТ – ALL FLANGED CROSS

    Përzgjidhni mundësiLoading Done Ky produkt ka disa variante. Mundësitë mund të zgjidhen te faqja e produktit