Showing 33–48 of 64 results
Features: Body and end rings are produced of ductile iron material EN-GJS-500 (GGG 50) according to EN 1563:2011 standard Flange Adaptors are produced according to EN 14525:2004 PN10, PN16 working pressure. Equipped with steel zinc plated bolts, nuts and washers EPDM rubber seals according to EN 681-1:1996
Features Features Body Ductile iron or steelbody. Working Pressure: PN10,PN16. Available range: DN 50-500. Inside and outside epoxy coated min. 250μm.
They can be used to repair the following types of pipes: Steel (St.); Azbest cement (AC); Steel coated with polyethylene; PVC; GPR; PE. Repair couplings should be used under the following conditions: The scope of the coupling should include the outside diameter of the pipe; The length of the coupling should be at least 150…
High quality material for cost effective installation Comparison of PE 100 to PE 100-RC Product Description PE 100 RC class materials and the most advanced plastic processing ensure the highest reliability of the product. Good abrasion resistance High stress crack resistance Good resistance to point loads (e. g. stones, fragments) (Dr. Hessel’s test) High resistance…
PE pipes have applications in:
Features: Flange gasket Material: NBR and EPDM. Standard: EN 681-1:1996/А3:2005 Dimensions: DN50 – DN1200. Working pressure: PN10, PN16, PN25 and PN40.
Features Material: Ductile iron GJS, bitumen coated Capacity: Class D400, according to EN124 Purpose: Water drain from highways and streets Usage: streets with high traffic intensity of regular vehicles Versions: Fixed
Features Rubber Joints balance thermal movements appear in any rigid system due to temperature changes. Flexible main shell made of EPDM according to EN 681-1:1996/A3:2005 with inner reinforcements to provide consistency Steel galvanized loоse flanges according to EN 1092-1:2007+A1:2013/AC:2014 Working Pressure: PN10, PN16. Available range: DN 50-600. Easy to install due to their light weight…
